Sheet cam not generating cut path

Post your questions or tips on SheetCam software in this topic.
Post Reply
Jaengbrecht
Posts: 1
Joined: Thu Dec 26, 2019 1:17 pm

Sheet cam not generating cut path

Post by Jaengbrecht » Fri Jan 31, 2020 9:23 pm

Sheet cam up until today has worked flawlessly for me. Now when I upload my cut file in to sheetcam, it does not generAte a cut path in Mach 3.... the code is all there, but no cut path. I have a licensed version I bought directly from sheet cam. Somebody please help me befor I go crazy.

GunGeek
Posts: 6
Joined: Wed Feb 05, 2020 11:04 pm

Re: Sheet cam not generating cut path

Post by GunGeek » Thu Feb 13, 2020 12:52 pm

I ran into this with Mach4. Somehow my material thickness got set to 0 in sheetcam when that occurred it would look proper in sheetcam but nothing would show up in Mach4. Check that first.

Les Newell
Posts: 116
Joined: Tue Mar 22, 2016 10:30 am

Re: Sheet cam not generating cut path

Post by Les Newell » Fri Feb 14, 2020 9:03 am

Could you post the code here for me to take a look.

Post Reply

Return to “SheetCam”

Industry Pros use FastCut CNC