2021 Arclight Dynamic 6x12 w/ Hypertherm Powermax105

[GSteel74]

2021 Arclight Dynamics Arc Max table with a Hypertherm Powermax 105 plasma machine.
I have had this table for a year and it works great. The only reason I'm getting rid of it is to get a machine with an oxyfuel setup to cut thicker material. I have cut everything from 16 gauge to 1 1/4" steel. The computer comes with Qcad to create the .dxf files, Sheetcam to assign operations and CandCNC control. The table will also come with an engraver, a hand held pendant and auto tracer. I am asking $30,000 since it is less than a year old and has been well-maintained. If you have any questions, or need anymore pictures, message me.

[adbuch]

That auto tracer is a nice feature, and typically about a $300 upgrade from Arclight Dynamics. So that is great that you already have it.
David

[tnbndr]

Nice setup!
What in the world are you cutting heavier than 1-1/4" for? Wouldn't it be easier to change out the plasma unit and torch head?

Good luck with the sale

[GSteel74]

Hi David, the auto tracer is a nice feature. It's great for replicating oddly shaped parts.

Dennis, I work with agricultural equipment and there are some parts that need to be pretty thick. I also work with 3/4" plate constantly, so I figured upgrading the plasma machine will increase productivity... hopefully.

[adbuch]

I was wondering the same thing. Why not just modify so you can mount the oxyfuel head and have dual capability? But if cost is no object, then I completely understand that purchasing a new turn-key system might be the best and easiest way to go for you.
David

[GSteel74]

I failed to mention that I'm going to be getting a Maxpro 200 with the new table. I'm not just buying a new table for the oxyfuel setup.

[adbuch]

That sounds very interesting. I found this thread where Jim Colt was discussing the Maxpro 200 vs. High Definition plasma.

viewtopic.php?t=12208

Lots of great information here.
David

maxpro 200.jpg

[tnbndr]

I failed to mention that I'm going to be getting a Maxpro 200 with the new table. I'm not just buying a new table for the oxyfuel setup.

Got it!! You should be covered for everything at that point.

Good Luck