Brand new, never connected or used. Bought from CandCNC for a Hypertherm 1000 but ended up buying a new plasma cutter and this is no longer n-eeded. Paid $98.50 plus shipping.
From the CandCNC website:
SEMI-CNC Connection Kit for units with the rear CPC connector but NO INTERNAL VOLTAGE DIVIDER
The Semi-CNC Connection Kit includes a CPC cable (MIC-02) with 4 wires to pickup the ARC OK and to fire the torch. The kit also includes a RAV-02 card to be mounted inside to furnish the Divided RAW ARC Volts. This is not for Plasma Cutters that have non-standard connectors.
Covers models that have the correct CPC connector (round 14 Pin) but lack the internal voltage divider.
All Thermal Dynamics “A” series without the optional Automation Interface Card. (A60, A80 A120)
Model 1000, 1250 , 1650 Hypertherms
Some Thermal Dynamics 52, 102 and 152 that have the rear CPC connector & no Automation Interface
$80.00 shipped anywhere in the lower 48. Let me know if you have any questions.-Text me at 760-983-9644 if interested. Thanks!
Buy and sell used plasma cutting and related equipment here.
1 post • Page 1 of 1