Hypertherm 1650 w/machine torch

Buy and sell used plasma cutting and related equipment here.
Post Reply
Dragfluid
Posts: 8
Joined: Sat Aug 03, 2019 8:51 pm
Location: Dayton, MN

Hypertherm 1650 w/machine torch

Post by Dragfluid » Sun Aug 25, 2019 9:40 pm

I have a 1650 for sale that has a straight machine torch, and no hand torch. It came with the table that I bought (DHC2), and since it's 3 phase only, I can't use it. (single phase only, here) Besides, it's a little overkill for what I want to do. All the leads are in great condition, with no abrasions. There are no consumables with this. The reason the table was put up for sale is, the plant that I bought it from bought a new, much larger table. I was assured that it was still working when it was taken out of service.

I'm looking to get $1800 for it, but like anything we can talk about that. I'm 20 miles north of the Twin Cities, MN.
PlasmaCam DHC2
PowerMax 1000
Tig
Mig
A hammer

ctgolfer1
Posts: 26
Joined: Thu May 30, 2019 4:35 pm

Re: Hypertherm 1650 w/machine torch

Post by ctgolfer1 » Mon Aug 26, 2019 5:07 pm

Doing a little research on the 1650, I do have 3 phase but I may not have enough amps without drawing another circuit.

Or I would have to unplug some equipment.


I see there are 40 amp tips available as well as fine cut tips.

Kinda hate to sell my Miller 65xp as it is near new.
Let me keep researching.

User avatar
SegoMan DeSigns
Elite Contributing Member
Elite Contributing Member
Posts: 237
Joined: Sat Jan 06, 2018 4:45 pm

Re: Hypertherm 1650 w/machine torch

Post by SegoMan DeSigns » Mon Aug 26, 2019 8:49 pm

How long is the hose?

Dragfluid
Posts: 8
Joined: Sat Aug 03, 2019 8:51 pm
Location: Dayton, MN

Re: Hypertherm 1650 w/machine torch

Post by Dragfluid » Wed Sep 11, 2019 9:17 am

Sorry, I need to get in the habit of checking in here on a regular basis.
Hose?? You mean the torch lead, I assume? It's 25'. The ground is 19', and the power lead is 8'. All are abrasion free.
PlasmaCam DHC2
PowerMax 1000
Tig
Mig
A hammer

Post Reply

Return to “Classified Ads”

Easyscriber engrave attachment for Hypertherm plasma cutters.