New to the Forum, I am a HS teacher and was curious if anyone could help.
I have Design Edge registered on my computer for use on a 4x4 PlasmaCam table. We just received a 2x2 GoTorch table at our school. I would like to run both machines on my one computer. Has anyone run two machines with one computer? I have not installed the software for the GoTorch yet, do I need to if I have it on the computer already for the PlasmaCam?
Thanks,
Steve
GoTorch with existing Plasma Cam software
-
loys
- 1/2 Star Member
- Posts: 1
- Joined: Fri May 22, 2020 10:15 am
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 8658
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: GoTorch with existing Plasma Cam software
Hi Steve,
If you don't already have it, you will need to purchase the Customizable Size upgrade for Design Edge in order to change the size of the table so Design Edge sees a 2x2 table size. You can't run both tables at the same time from the same computer, only one at a time.
Thanks,
David
If you don't already have it, you will need to purchase the Customizable Size upgrade for Design Edge in order to change the size of the table so Design Edge sees a 2x2 table size. You can't run both tables at the same time from the same computer, only one at a time.
Thanks,
David
