Changing the table size

Plasmacam software related questions and tips can be posted here
Post Reply
Charles Shaw
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 19
Joined: Wed Jul 11, 2018 4:34 pm

Changing the table size

Post by Charles Shaw »

Hey everybody,

I have the go torch and have purchased most or the upgrades to allow me to build a larger table, I'm going foe a 5' x 12' table and have most of the pcs. ready to assemble but I can't figure out how to change the table size in the software!! in the box that shows your current table size mine shows a 2' x 2' and will only let me change it to a 2' x 12'. how do I get it to accept the size I want?
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1157
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Changing the table size

Post by rdj357 »

Go to the System Setup tab and uncheck the Standard Configuration box. You will be able to change the size there if you have purchased Customizable Size.
Charles Shaw
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 19
Joined: Wed Jul 11, 2018 4:34 pm

Re: Changing the table size

Post by Charles Shaw »

With your help I got the size changed on the table and on the screen, thanks a million.
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1157
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Changing the table size

Post by rdj357 »

Great! No problem, any time!
Post Reply

Return to “Plasmacam - DesignEdge”