It is currently Tue Nov 20, 2018 9:20 pm

Easyscriber engrave attachment for Hypertherm torch's
 

reducing nodes after an manual trace using spline command

Post your questions or tips on Plasmacam software in this topic.
knight7338
Posts: 17
Joined: Fri Mar 08, 2013 7:11 pm

reducing nodes after an manual trace using spline command

Postby knight7338 » Mon Apr 02, 2018 7:48 pm

quick question i did a manual trace using the spline command a lot of the time and this gave me a high node count. i know sheet cam will reduce the nodes but is there a way to reduce them in design edge while in a dxf file?

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 542
Joined: Sun Mar 11, 2012 4:40 pm

Re: reducing nodes after an manual trace using spline command

Postby rdj357 » Tue Apr 03, 2018 9:34 am

2 things to try. First of all, make sure your node precision is at 100 or so on the design tab.

You can explode the drawing and re-join it. This will reduce the nodes to the precision set.

You can also try smoothing to a low margin. (.002 to .005) and it will similarly reduce nodes and fix small issues.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube


Return to “Plasmacam Software”

Who is online

Users browsing this forum: No registered users and 2 guests

Easyscriber engrave attachment for Hypertherm torch's