New Samson 510 table new options

Post your questions or tips on Plasmacam software in this topic.
Post Reply
hoodgurl_unarmed
Posts: 3
Joined: Tue Mar 19, 2019 12:44 pm

New Samson 510 table new options

Post by hoodgurl_unarmed » Sun Mar 24, 2019 7:15 pm

Just got a Samson 510 table , hypertherm 65 ,with design edge software. With my old trucut table and software I could click "run from here" and start where the table stopped or missed a cut even if it went through the whole file, so my question is how can I do that with my new machine. Thank you.

bigcreek
Posts: 233
Joined: Tue Jul 28, 2009 11:23 pm

Re: New Samson 510 table new options

Post by bigcreek » Tue Mar 26, 2019 3:01 am

I am probably not understanding your question correctly, but if my torch misfires a thing comes up on the computer screen asking me if I want it to continue cutting from where it last stopped cutting or something like that.

motoguy
Elite Contributing Member
Elite Contributing Member
Posts: 1171
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: New Samson 510 table new options

Post by motoguy » Tue Mar 26, 2019 9:03 am

Samson is the same as Plasmacam, so asking Plasmacam users may find your answer.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 583
Joined: Sun Mar 11, 2012 4:40 pm

Re: New Samson 510 table new options

Post by rdj357 » Tue Mar 26, 2019 4:19 pm

If a red dot comes up and you don't unselect the remaining to cut paths, it will ask you if you'd like to resume where cutting stopped.

If you're trying to finish a bunch of cuts and have either accidentally unselected the remaining cuts or otherwise need to continue from one path to the end, here's a video I did. This topic starts at 30 minutes in.

https://www.facebook.com/learnplasmacam ... 003642722/
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

hoodgurl_unarmed
Posts: 3
Joined: Tue Mar 19, 2019 12:44 pm

Re: New Samson 510 table new options

Post by hoodgurl_unarmed » Fri Apr 05, 2019 11:26 am

Thank you, I wanted to start just a little bit before it stopped. But still have not figured out how to go back. With the trucut table I can go to a specific spot and recut a place that did not cut correctly. Thanks for the help.

Kit Barlow
Posts: 1
Joined: Tue Dec 25, 2018 4:14 am

Re: New Samson 510 table new options

Post by Kit Barlow » Fri May 10, 2019 2:15 am

Restart the cut but before it fires hit stop on the controller and then use the shuttle dial to track along the cut line. This makes the machine follow the cut path. Once you track to where u want to start. Hit the start button. Hope this helps

Post Reply

Return to “Plasmacam Software”

Easyscriber engrave attachment for Hypertherm torch's