Oxford Cutmaker 350

[alanmccabe]

HI all, I have ordered an Oxford Cutmaker 350 with the CNC interface and socket option to be able to remove the torch. Apparently the machine comes with a Tramifit S65 torch which I have just noticed is a drag tip. Does anyone know if it can be modified as I expect I cant really use a drag tip on my table. I expect I will ultimately get a machine torch once the machine starts to make money I assume this is just a case of unplugging the old and plugging in the new.

Thanks in advance for comments or suggestions.

[robertspark]

https://www.google.com/url?sa=t&source= ... KkagvzwBji

pdf page 30 and 28 shows the difference between the two, and you can just change consumables.

swap out items 1, 2 and 3.

there is a machine torch variant too on pdf page 78

[alanmccabe]

When it comes I will share a few pics when I get it dialled in, seems they are on a 30 day delivery at the minute. They are really heavy but as I am not intending to move it about that didn't worry me much. Hypertherm is out of my budget at the minute.

[alanmccabe]

So the Cutmaker finally arrived today, seems very nice. I ordered the cnc interface but it came with no info on pinouts etc, anyone have any info
Thanks Alan

[robertspark]

No, and I can't seem to find a PDF on it.

I would contact them monday morning and get the official line from the manufacturer..... don't want to risk guessing for you if it follows what some other manufacturers use.

[alanmccabe]

Yes Robert I agree, I sent an email earlier so hopefully I will be enlightened. To be honest the manual seems somewhat amateurish for a pro company.

[alanmccabe]

Oxford CNC interface pinouts in case anyone needs them.

Cheers Alan

Oxford CNC Diagram.pdf

(90.28 KiB) Downloaded 47 times