Hey guys,
Material prices are extremely volatile right now, word is its going to get worse before it gets better.
I have a few quotes in the wind that I will be buying material and keeping as stock if the jobs dont fly.
I'm gambling a bit and I think it's the safe bet.
Just putting this out there and hope if you didnt think of it this will spur you into at least giving it a little thought.
Good luck..
Chris
Material prices
-
cstroke
- 3 Star Elite Contributing Member
- Posts: 405
- Joined: Thu May 24, 2012 7:45 pm
Material prices
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
-
cutnweld
- 3 Star Elite Contributing Member
- Posts: 281
- Joined: Mon Oct 14, 2019 1:47 pm
Re: Material prices
Good deal. I just purchased some sheets of strenx100, 3 sheets cost almost $7000. What you all paying for it? 1" and 3/4" thick
5X10 Shop built table
20x80x32 inch gap lathe
10x40 lathe
10x54 milling machine
2-Miller 255
Miller XMT350MPA
Lincoln squarewave tig 255
12 Ft Durma Brake
20x80x32 inch gap lathe
10x40 lathe
10x54 milling machine
2-Miller 255
Miller XMT350MPA
Lincoln squarewave tig 255
12 Ft Durma Brake
