Deepnest Nesting Software

General software related questions should be posted here.
Post Reply
Dawgonhawg
3 Star Member
3 Star Member
Posts: 487
Joined: Sun Mar 27, 2011 10:13 pm

Deepnest Nesting Software

Post by Dawgonhawg »

Has anyone tried this software out? Its $125 for the software.
https://deepnest.io/

Jim
User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 822
Joined: Sat Jan 06, 2018 4:45 pm

Re: Deepnest Nesting Software

Post by SegoMan DeSigns »

Hey Jim,

That is not a fixed amount (the $$ slider moves) Slide it to 0 and try it, if you like it then through him some $$$
TTMotorsports
1.5 Star Member
1.5 Star Member
Posts: 31
Joined: Wed Mar 05, 2014 8:08 pm

Re: Deepnest Nesting Software

Post by TTMotorsports »

I downloaded it and used it one time. I usually just nest it on plasmacam software since i rarely have a bunch to cut on a new sheet. But it works well and fairly quick.
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Deepnest Nesting Software

Post by motoguy »

TTMotorsports wrote:I downloaded it and used it one time. I usually just nest it on plasmacam software since i rarely have a bunch to cut on a new sheet. But it works well and fairly quick.
My primary interest would be the ability to nest into a remnant sheet, vs a new one. Can you define the remnant sheet as the "sheet", and nest within it?
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
TTMotorsports
1.5 Star Member
1.5 Star Member
Posts: 31
Joined: Wed Mar 05, 2014 8:08 pm

Re: Deepnest Nesting Software

Post by TTMotorsports »

I haven't looked into it that much. BUT you can slide the price bar to $0.00 and download it. If you find it useful kick the designer some money.
fnqplasma
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 10
Joined: Sun Nov 26, 2017 2:47 am

Re: Deepnest Nesting Software

Post by fnqplasma »

downloaded it to try, works very well. You can draw a sheet size, offcut, remnant ect and import it as the sheet to use, and then nest into it. Excellent to try and worth paying for. The downside is that it only works on one layer of the dxf file. You need to open the nested dxf back into cad and set your layers for holes, inside and outside offsets.

I haven't used any 'paid for' nesting software so I cannot compare
fnqplasma
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 10
Joined: Sun Nov 26, 2017 2:47 am

Re: Deepnest Nesting Software

Post by fnqplasma »

deepnest test.dxf
(1003.67 KiB) Downloaded 102 times
Post Reply

Return to “General Discussion”