Code: Select all
N150 G28.1 Z0.12 F19.685
Thank you for your time.
Also, there's the SVG file attached. I had to scale down the original drawing to made it the right size in sheet cam. Came out to be 680 inches long ways at first... supposed to be 26.5. Scaled at 3.9% (26.5 divided by 1680 = 0.0389 ((3.9))).
Code: Select all
N0010 (Filename: 9inscaled.tap)
N0020 (Post processor: MP3000-DTHCII+scriber2.scpost)
N0030 (Date: 16/04/2016)
N0040 G20 (Units: Inches)
N0050 F1
N0060 G53 G90 G40
N0070 S10 (DTHC is off)
N0080 (Part: 9inscaled)
N0090 (Operation: No Offset, Color 0, T1: Plasma, 0.035 in kerf)
N0100 (tool number: 1 Feedrate: 4)
N0110 (No Stored DTHC parameters in this POST)
N0120 G00 Z1.5000
N0130 X4.6133 Y6.0197
N0140 Z0.1500
N0150 G28.1 Z0.12 F19.685
N0160 G92 Z0.0
N0170 G00 Z0.0591
N0180 G92 Z0.0
N0190 G00 Z0.1500
N0200 M03
N0210 G01 Z0.0600 F60.0
N0220 S20 (DTHC is on)
N0230 F4.0
N0240 G02 X8.6930 Y8.0556 I8.2872 J-11.5009
N0250 X13.1678 Y8.9044 I5.9267 J-19.0261
N0260 X15.4638 Y8.6183 I-1.3077 J-19.8501
N0270 X20.5803 Y6.7847 I-2.8632 J-16.0454
N0280 X26.5257 Y0.0000 I-6.6756 J-11.8471
N0290 G01 X0.0000
N0300 G02 X0.9942 Y1.9932 I15.0161 J-6.2453
N0310 X4.6133 Y6.0197 I11.4602 J-6.6610
N0320 M05
N0330 G00 Z1.5000
N0340 X0.0000 Y0.0000
N0350 S900
N0360 M22
N0370 S10 (DTHC is off)
N0380 M22
N0390 M05 M30