Easyscriber engrave attachment for Hypertherm torch's
 

Adding Lead In's with CorelDRAW

Corel Draw Graphics Suite related questions and tips can be posted to this topic.
Post Reply
User avatar
trucks1948
Posts: 429
Joined: Sat Jun 13, 2009 10:00 am
Location: Baraboo,Wi

Adding Lead In's with CorelDRAW

Post by trucks1948 » Thu Jan 21, 2010 6:50 pm

Does anyone know if there is a way to make lead ins in corel x4? Is there some way to get the cut to start where i want it to start?I can get the order of the cut changed but not the starting place.Also is there a way to change cutting direction(cw or ccw).Thanks Jim

williamd
Posts: 13
Joined: Fri Dec 18, 2009 9:06 am
Location: Lambton, Quebec, Canada Eh~!
Contact:

Re: Corel Question

Post by williamd » Thu Jan 21, 2010 8:19 pm

You can change the direction of the vector objects with the "Shape Tool" > "Reverse Direction".....

As for where it will start, not to my knowledge in Coreldraw. In other CAD/CAM softwares yes....

User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 505
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Corel Question

Post by Scratch » Thu Jan 21, 2010 10:49 pm

There was a thread about that a while ago.... here it is:
http://plasmaspider.com/viewtopic.php?f ... d+in#p2826

Hope it helps... I'm not sure if I described it very good or not... :oops:
I think I'm the oldest 10 year old boy on the forum...

User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 505
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Corel Question

Post by Scratch » Thu Jan 21, 2010 11:03 pm

williamd wrote:You can change the direction of the vector objects with the "Shape Tool" > "Reverse Direction".....

As for where it will start, not to my knowledge in Coreldraw. In other CAD/CAM softwares yes....

By the way... thanks to williamD for the "reverse direction" tip... I didn't know that one, and that could come in handy for me!
I think I'm the oldest 10 year old boy on the forum...

Post Reply