Image
To close this announcement click the X in the top right corner.
Industry Pros use FastCut CNC

Problem with ovals in Coreldraw x6

Corel Draw Graphics Suite related questions and tips can be posted here
adbuch
5.5 Star Elite Contributing Member
5.5 Star Elite Contributing Member
Posts: 4369
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Problem with ovals in Coreldraw x6

Post by adbuch » Wed Mar 02, 2022 8:20 pm

OTHill wrote:
Wed Mar 02, 2022 7:18 pm
Ok thanks so much for all the reply. After much playing around I've discovered if I Convert to curves before exporting the problem disappears. I'll just have to remember to do that to any drawing that has holes or ovals.
:Like :Like :Like

weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1098
Joined: Fri Apr 17, 2009 11:48 am

Re: Problem with ovals in Coreldraw x6

Post by weldguy » Thu Mar 03, 2022 1:05 pm

Glad you have a solution. I also use Corel and to eliminate issues like that I save all my designs in Corel cdr format. I export to dxf so I can get that design to machine but after that the dxf can be discarded. I just use dxf as a bridge to go from design software to the cutting table and that's it. If I need to edit the design I will go back to my cdr file, make the changes, and send out another dxf to recut. Dxf files cause all kinds of issues and I feel this is guaranteed safe way to go.

adbuch
5.5 Star Elite Contributing Member
5.5 Star Elite Contributing Member
Posts: 4369
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Problem with ovals in Coreldraw x6

Post by adbuch » Thu Mar 03, 2022 2:55 pm

weldguy wrote:
Thu Mar 03, 2022 1:05 pm
Glad you have a solution. I also use Corel and to eliminate issues like that I save all my designs in Corel cdr format. I export to dxf so I can get that design to machine but after that the dxf can be discarded. I just use dxf as a bridge to go from design software to the cutting table and that's it. If I need to edit the design I will go back to my cdr file, make the changes, and send out another dxf to recut. Dxf files cause all kinds of issues and I feel this is guaranteed safe way to go.
:Like :Like :Like :Like :Like

Post Reply

Return to “Corel Draw Graphics Suite”

Industry Pros use FastCut CNC