Alodized/Anodized Alum Sign Blanks

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
pdjcutandfab
2.5 Star Member
2.5 Star Member
Posts: 158
Joined: Sat Jul 18, 2009 10:40 am

Alodized/Anodized Alum Sign Blanks

Post by pdjcutandfab »

I have a potential customer that wants me to plasma cut some shapes out of Anodized or Alodized Aluminum (i'm not sure which one, the customer has to get back to me and let me know). does anyone have any experiance with either of these materials.

Thanks

Pat Weier
PDJ Cutting and Fabricating
User avatar
jeeplogic83
2.5 Star Member
2.5 Star Member
Posts: 154
Joined: Fri Nov 14, 2008 6:52 am
Location: West MI
Contact:

Re: Alodized/Anodized Alum Sign Blanks

Post by jeeplogic83 »

be aware that the anodized coating is non-conductive. You will have to grind a section to make a ground connection and it is toxic when cutting good ventolation is a must.
pdjcutandfab
2.5 Star Member
2.5 Star Member
Posts: 158
Joined: Sat Jul 18, 2009 10:40 am

Re: Alodized/Anodized Alum Sign Blanks

Post by pdjcutandfab »

Thanks for the Info, i will keep that in mind
Post Reply

Return to “Plasma Cut Quality Forum”