X axis moves 1/2 mm right when torch fires

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
Lonesome
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Mar 19, 2019 1:27 pm

X axis moves 1/2 mm right when torch fires

Post by Lonesome »

Every time the torch fires the x axis moves to the right about 1/2 mm. Therefore making sign off balance. Using Mach 3 and sheet cam. Any help is appreciated.
Top
cuttinparts
3 Star Member
3 Star Member
Posts: 362
Joined: Tue Sep 30, 2008 3:40 pm

Re: X axis moves 1/2 mm right when torch fires

Post by cuttinparts »

What plasma cutter are you using?

Curious if it has a high frequency start that's causing the issue.
Top
Post Reply

Return to “Plasma Cut Quality Forum”