Easyscriber engrave attachment for Hypertherm torch's
 

Lead In Length

Plasma Cut Quality can often be an issue for many of us. Check here if you have plasma cut quality issues. Ask a question, look for advice, post a helpful tip here.
Post Reply
Dawgonhawg
Posts: 484
Joined: Sun Mar 27, 2011 10:13 pm

Lead In Length

Post by Dawgonhawg » Sun Sep 30, 2018 1:46 pm

I know I've seen it but can't find it.
What is the recommended lead in length when possible?
I have a Powermax 85.
Thank you, Jim

djreiswig
Elite Contributing Member
Elite Contributing Member
Posts: 378
Joined: Thu Nov 19, 2015 10:02 pm

Re: Lead In Length

Post by djreiswig » Sun Sep 30, 2018 4:38 pm

I usually go with the material thickness on thicker stuff. Or 1/8" or so for thin sheet metal.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)

Post Reply