It is currently Sun Nov 18, 2018 4:13 pm


help on holes

Plasma Cut Quality can often be an issue for many of us. Check here if you have plasma cut quality issues. Ask a question, look for advice, post a helpful tip here.
Elite Contributing Member
Elite Contributing Member
Posts: 943
Joined: Thu Jan 02, 2014 6:33 pm

help on holes

Postby gamble » Tue Apr 17, 2018 11:09 pm

I think the anti back lash nuts are in need of being replaced. How can I tell for certain if it's the ones on the X or Y the axis that need to be replaced? Rathe not replace ones that don't need to be replaced for now.

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor

Posts: 147
Joined: Fri Apr 17, 2009 11:48 am

Re: help on holes

Postby weldguy » Mon Apr 23, 2018 11:24 am

Use your calipers to measure which direction the circle is out of round on and that will be the axis that needs the work I assume. From the picture it looks like left to right is narrower than bottom to top. Good luck.

Return to “Plasma Cut Quality Forum”

Who is online

Users browsing this forum: No registered users and 4 guests

Easyscriber engrave attachment for Hypertherm torch's