Easyscriber engrave attachment for Hypertherm torch's

Successful SS cut!!!

Plasma Cut Quality can often be an issue for many of us. Check here if you have plasma cut quality issues. Ask a question, look for advice, post a helpful tip here.
Post Reply
Posts: 1
Joined: Thu Dec 01, 2016 8:10 pm

Successful SS cut!!!

Post by beebstaylor » Sun Jul 23, 2017 4:59 pm

Hi all,

This is my first time posting and I am new to plasma cutting (within the last year). Still learning a lot. No problems or issues with this cutting. Have read many on threads on different subjects and they have helped ALOT so I thought I would post a successful cutting. This project is for a friend and he supplied the material and was a little apprehensive. This was my first time cutting SS and I am happy to say there was minimal dross on both top and bottom.

We have added some upgrades so I think that helped. We upgraded to Advanced Height Control and have invested in the Hypotherm 45xp. I went by the book settings. I cut this project out of 14ga SS. Not sure of the grade of SS as the friend supplied the material.

Hopefully the pics are coming through.
VERY happy with the outcome :D

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Hypotherm 45xp
Design Edge
Plasma Cam DHC2
Advanced Height Control
Advanced Machine Control
Advanced Design

Old Iron
Elite Contributing Member
Elite Contributing Member
Posts: 463
Joined: Wed Nov 26, 2014 5:12 pm

Re: Successful SS cut!!!

Post by Old Iron » Sun Jul 23, 2017 8:04 pm

Excellent job!*!*!*

User avatar
Elite Contributing Member
Elite Contributing Member
Posts: 1019
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro

Re: Successful SS cut!!!

Post by Capstone » Sun Jul 23, 2017 8:06 pm

nice. good job.

I know that a local metalshop that does a tone of SS use pure nitrogen, not regular air. But that's because they do a lot of SS for pro-kitchens etc.
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG

Post Reply