1250 g3 other charts

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
Lightning_strike
Posts: 11
Joined: Mon Aug 26, 2019 6:37 pm
Location: Riverviewn, fl*

1250 g3 other charts

Post by Lightning_strike » Mon Sep 09, 2019 10:02 pm

So I have a samson 510 with a powermax 1250, I have all the cut charts but I'm having a hell of a time finding charts for proper kerf (or nozzle orifice size to multiply it by 1.5), air pressures. I understand that hypertherm has multiple models but Why do we not have charts for these?
Samson 510
Hypertherm powermax 1250
campbell hausfeld 60 gal
Hobart ironman 230 :Yay
3/4" blade band saw
4ft finger brake
Miller diversion 180
Millermatic 140

weldguy
Elite Contributing Member
Elite Contributing Member
Posts: 408
Joined: Fri Apr 17, 2009 11:48 am

Re: 1250 g3 other charts

Post by weldguy » Tue Sep 10, 2019 10:52 am

I couldn't find kerf width charts for the 1250 either. Just set your machine up to cut a 6" straight line at the appropriate speed, height, and amperage and then measure the kerf width, document it for future reference and your all set :Like

User avatar
SegoMan DeSigns
Elite Contributing Member
Elite Contributing Member
Posts: 264
Joined: Sat Jan 06, 2018 4:45 pm

Re: 1250 g3 other charts

Post by SegoMan DeSigns » Tue Sep 10, 2019 11:16 am

Does it have the older machine torch or the newer Duramax? You could probably takes the values from the 85 and be close.

Lightning_strike
Posts: 11
Joined: Mon Aug 26, 2019 6:37 pm
Location: Riverviewn, fl*

Re: 1250 g3 other charts

Post by Lightning_strike » Tue Sep 10, 2019 12:54 pm

I have the T80 torche
Samson 510
Hypertherm powermax 1250
campbell hausfeld 60 gal
Hobart ironman 230 :Yay
3/4" blade band saw
4ft finger brake
Miller diversion 180
Millermatic 140

User avatar
Nacs Fab
Elite Contributing Member
Elite Contributing Member
Posts: 321
Joined: Tue Dec 04, 2012 4:11 pm
Location: Columbia, MO

Re: 1250 g3 other charts

Post by Nacs Fab » Wed Sep 18, 2019 12:50 pm

I have some cut charts for this machine, let me see if I can find them and upload them here. At one point, I got the kerfs from either here or on another forum where Jim Colt posted for both the older torches as well as the new Duramax torch, which I have. Give me a day or so and Ill see what I can find.
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...

robertspark
Elite Contributing Member
Elite Contributing Member
Posts: 574
Joined: Mon Jun 12, 2017 6:43 pm
Location: nr Liverpool, UK

Re: 1250 g3 other charts

Post by robertspark » Wed Sep 18, 2019 1:32 pm

not the answer you want but it was from Jim colt for the 1250 and he should know

https://www.cnczone.com/forums/hyperthe ... forum.html
UCCNC,
Sheetcam
Hypertherm Powermax 45 (nonXP)
Neuron Lite THC
Hobby user (4x4 home table)

robertspark
Elite Contributing Member
Elite Contributing Member
Posts: 574
Joined: Mon Jun 12, 2017 6:43 pm
Location: nr Liverpool, UK

Re: 1250 g3 other charts

Post by robertspark » Wed Sep 18, 2019 1:37 pm

UCCNC,
Sheetcam
Hypertherm Powermax 45 (nonXP)
Neuron Lite THC
Hobby user (4x4 home table)

User avatar
Nacs Fab
Elite Contributing Member
Elite Contributing Member
Posts: 321
Joined: Tue Dec 04, 2012 4:11 pm
Location: Columbia, MO

Re: 1250 g3 other charts

Post by Nacs Fab » Wed Sep 18, 2019 1:51 pm

Here is what i use without any problems using my Duramax Torch but I also used it when I had my old T80M (i belive thats the name of it).

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here

Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...

Lightning_strike
Posts: 11
Joined: Mon Aug 26, 2019 6:37 pm
Location: Riverviewn, fl*

Re: 1250 g3 other charts

Post by Lightning_strike » Sat Sep 21, 2019 3:39 pm

Cool cool. I'll use the pm 85 chart as much as possible
Samson 510
Hypertherm powermax 1250
campbell hausfeld 60 gal
Hobart ironman 230 :Yay
3/4" blade band saw
4ft finger brake
Miller diversion 180
Millermatic 140

Post Reply

Return to “Plasma Cut Quality Forum”

Easyscriber engrave attachment for Hypertherm plasma cutters.