Looking at 5x10 AAS Raptor table

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
elijahroberts199
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sun Apr 02, 2023 10:06 pm

Looking at 5x10 AAS Raptor table

Post by elijahroberts199 »

Shark Navigator Lift-Away deluxe NV360 - A multi-functional floor vacuuming tool

Most of us have mixed-material floors, and this popular flooring option brings charm to our house. However, it needs to be taken good care of, as each type of material requires a different cleaning method. For example, carpet attracts more dust and pet hair; thus, it can be difficult to vacuum. Timber surfaces, on the other hand, do not accumulate dust as much as carpeted floors. So they are easier to clean but can easily get scratched.

That said, if we’re on the market to purchase floor cleaning tools, it's important to pick those packed with versatility, like the Shark NV360. Read on as we explain why this vacuum is ideal for homes of mixed floor types.

1. It is portable and maneuverable

Upright vacuums are usually heavy to carry around, and things can get even more difficult if you need to vacuum stairs. This Shark is no different as it weighs more than 15 pounds. However, this weight doesn't tell you whether it is portable. Indeed, the tool is an exception, as it comes with a detached canister, allowing owners to lift the pod away to vacuum off-floor surfaces with little effort.

The maneuverability of any vacuums will depend on how their cleaner heads are made. Shark model NV360 comes with a swivel steering head, making it easy to move around corners and edges. If your house is packed with furniture, this device would be an ideal choice, so navigating around tables, chairs, cabinets can no longer challenge you.

Image

2. It is versatile with a practical set of attachments

Some expensive vacuum models usually come with a series of accessories, but not all users will need to use them. So those with all of the bells and whistles can become useless as they’re only designed as nice-to-have tools. That said, shoppers should always check to see if the included attachments are really necessary. Otherwise, they might end up collecting dust in the corner of your house with their labels on.

While most Shark navigator NV360 reviews pay little attention to this fact, this review is different, as we aim to help our customers pick only the most reasonably-priced vacuums with practical features. Its pet power brush can nip your pet hair problem in the bud. Pets leave hair whenever they come and go so that you can find their fur on the sofa, chair, beds. This tool comes in handy as you can quickly attach it to the wand and dislodge all pet hair away.

Upright vacuum cleaners usually come with excellent suction power, so they can easily damage fragile decorative surfaces. However, if you own the Shark navigator lift away deluxe NV360, you don't have to worry about this, as the tool comes with a dusting brush, letting users clean up delicate surfaces easily. Last but not least, it also comes with a 5.5-inches crevice tool to help users get into tight spots and hidden corners.

Image

3. It has a premium filtration system

The tool is equipped with a HEPA filter and an Anti Allergen Complete Seal system, which means it can trap more than 90% of allergens, pollutants, and pollen from your air. Families with allergy sufferers, little kids, or those with respiratory-related symptoms would find this tool an ideal choice.

The bottom line

The Shark navigator lift away deluxe NV360 has unwavering suction strength thanks to a 1200W motor. The device's detachable canister also makes it highly flexible and portable, while its affordable price wouldn't leave a huge dent in your wallet. In short, this 2-in-1 cleaning tool is undoubtedly a perfect choice for many homeowners.
Last edited by elijahroberts199 on Mon Jan 29, 2024 5:56 am, edited 2 times in total.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8621
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: 5x10 AAS Raptor table

Post by adbuch »

I'm not familiar with that brand, but if it is fully functional with no mechanical/software problems than $1500 seems like a "steal". Mach3 and Sheetcam or both fine programs as well. Perhaps post some photos with more information. I would make sure that you can see it run before you make your purchase. Even if it is only a dry run. If it does have thc, then you would want to make sure that works as well. If all parts are brand new and never used, chances are it is in good condition. Does it come with computer with the software already installed?

David
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7784
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 5x10 AAS Raptor table

Post by acourtjester »

Having the Langmuir is great, you know what the other table can do and how the total assembly should work. You should not have many of the startup questions, just how one table does it verse the other. Most likely the software tune would be the difference, Mach and SheetCam has be talked about here so lots of reference searches can be done for info. Enjoy the larger table as the new tool in the shop. Remember there is a large knowledge pool here for you to ask questions to.
have fun
Tom
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1955
Joined: Fri Apr 17, 2009 11:48 am

Re: 5x10 AAS Raptor table

Post by weldguy »

I would agree $1500 seems like a steal. I am not familiar with the brand and it could be a headache but if your DIY kind of guy anyway this could be a great starting point. Great thing is you have your other table until you get this one up and running.
tulsajosh
1.5 Star Member
1.5 Star Member
Posts: 42
Joined: Sat May 04, 2019 9:30 pm
Contact:

Re: Looking at 5x10 AAS Raptor table

Post by tulsajosh »

Don't waste your money on ANY AAS machines their a pile of junk and use CHEAP Control systems.
Spaded Creatives LLC.

Lincoln Torchmate 2 4x8 Watertable
ShopBot 5x10 CNC Router
Miller XMT 304 welder
Miller Suitcase 12Rc
Miller 15a Mig gun
Eastwood Tig 200
Lincoln 140HD welder
Roland GX 24 vinyl cutter
Hyper smooth Powder coater
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8621
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Looking at 5x10 AAS Raptor table

Post by adbuch »

Looks like they sell on craigslist and local advertising only. Don't seem to have a website. So I was not able to get any detailed information on these.
It would be nice to see exactly what you are getting before making a purchase, even on used stuff. It might be easier to simply expand the size of your Langmuir table. But they did say they don't use Arduino controller.

David

https://www.shoppok.com/amarillo/a,41,1 ... e--OK-.htm
aas.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

cutnweld
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 280
Joined: Mon Oct 14, 2019 1:47 pm

Re: Looking at 5x10 AAS Raptor table

Post by cutnweld »

Maybe you could get the table and make it talk to Linux plasmac? If you are a DIYer. Otherwise I would steer clear of these moonlight plasma table brands that pop up one day and gone the next. You will want some form of tech support unless you want to sail out on your own path.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8621
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Looking at 5x10 AAS Raptor table

Post by adbuch »

I think cutnweld gives great advise! Unless you are a diy guy and well versed in the controller/interface aspects - perhaps it's best to steer clear on this one.

David
Post Reply

Return to “CNC Plasma Cutters General Forum”