Question

[ironhorse]

Did someone at one time have an ebook of sorts with plasma cam setting tips and tricks?

Thanks in advance,

Greg

[adbuch]

When you say "E Book" perhaps you are thinking about the Plasmacam Video Manual, which is a DVD. You can purchase a replacement Video Manual at the Plasmacam Owner's Community website for $10.

https://owners-community.com/order_parts.php?sid=

Robert Johnson has a great Youtube video called "Design Edge Settings Explained".

https://www.youtube.com/watch?v=7rcm0DdDPfo

You may want to check out his other Learn Plasmacam videos here.

https://www.youtube.com/c/LearnPlasmacam/videos

David

[ironhorse]

I have the plasma cam video manual but thank you for taking the time to reply. Someone had done a tips and tricks deal on settings, was just trying to find.

[adbuch]

I am pretty new to Plasmacam, having owned and used my tables for only a little over 5 years. Some of the "old timers" might have heard of a "Plasmacam settings tips and tricks" E-book. Robert Johnson and John Derby are both long-time Plasmacam owners. I would recommend you join and post your question at the Plasmacam Facebook user's group linked below. Robert Johnson is the moderator.

https://www.facebook.com/groups/PlasmaCAM.Tips

If you are the registered owner of a Plasmacam table, then you have access to the Plasmacam Owner's Community online forum. John Derby is one of the moderators and would probably know the answer to your question - if anyone does.

https://owners-community.com/index.php? ... f3079f12ec

Which model table do you have? And are you running 3.11 (older software) or Design Edge 4.53 (current software)?
For Design Edge, Robert's video should most likely answer any settings questions you might have. You can also post your Design Edge settings questions here and either myself or Robert should be able to answer them for you.

David