Greetings to everyone....i bought an lgk -100IGBT from a chinese distributor.my problem is;
-During cut the plasma suddenly goes of and move along the path of cut without cutting and if am lucky it cut the next design.
-And using sheetcam to generate my g-code .but during simulate i discover it stops at one point .i am unable to figure out where exactly the problem is coming from(sheetcam doesn't show any error sign after u click plasma cut)
I will gladly embrace your contributions
Need help with my chinese plasma cutter!!
-
- 1/2 Star Member
- Posts: 7
- Joined: Sat Mar 06, 2021 5:37 pm
-
- 1 Star Member
- Posts: 18
- Joined: Mon May 09, 2016 4:20 pm
Re: Need help with my chinese plasma cutter!!
Hi John, those cutters are pretty good, but probably you have recieved it with the cheap P80 torch which makes the trouble.
-
- 4 Star Elite Contributing Member
- Posts: 1955
- Joined: Fri Apr 17, 2009 11:48 am
Re: Need help with my chinese plasma cutter!!
Any error lights come on if it has any?
-
- 1/2 Star Member
- Posts: 7
- Joined: Sat Mar 06, 2021 5:37 pm
Re: Need help with my chinese plasma cutter!!
Please can you recommend to me a good touch that i can buy to solve the problemattila0216 wrote: ↑Sun Apr 11, 2021 1:26 am Hi John, those cutters are pretty good, but probably you have recieved it with the cheap P80 torch which makes the trouble.
-
- 1/2 Star Member
- Posts: 7
- Joined: Sat Mar 06, 2021 5:37 pm
-
- 4 Star Elite Contributing Member
- Posts: 1955
- Joined: Fri Apr 17, 2009 11:48 am
Re: Need help with my chinese plasma cutter!!
OK, I am not familiar with that plasma, it may not even have any but I thought I would ask first.
Do you have an air pressure gauge at the back of the plasma cutter to monitor input pressure when this problem happens?