Sheetcam Post Processor for Flashcut
-
- 1 Star Member
- Posts: 18
- Joined: Fri Jul 05, 2019 10:44 pm
Sheetcam Post Processor for Flashcut
Ive got a few years of experience with mach3 and sheetcam, in my home shop, my real job and in college and I really like the interface of it. My newest table has a flashcut CNC controller and Ive been using it for a few months now. While it is nice and easy to use I just dont feel like I have the control of sheetcam for toolpath planning. Like for example you cant adjust your lead ins by layer, you have to do it one at a time which is a real pain on a fully nested sheet. Does anyone have a post Processor for sheetcam that would be compatible with the Flashcut controller? And if anyone knew how to control it with an x box controller that would be a huge bonus
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1936
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Sheetcam Post Processor
Maybe try the SheetCam forum. I know Les replies pretty quickly over there. I'm sure he can help you with a post.
https://forum.sheetcam.com/index.php
https://forum.sheetcam.com/index.php
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 3 Star Member
- Posts: 354
- Joined: Fri Apr 15, 2011 3:47 am
Re: Sheetcam Post Processor for Flashcut
Check this topic out, it may help you https://forum.sheetcam.com/viewtopic.php?t=8048
-
- 1 Star Member
- Posts: 18
- Joined: Fri Jul 05, 2019 10:44 pm
Re: Sheetcam Post Processor for Flashcut
Thanks I signed up for the sheetcam forum and Im waiting to be approved. That is very close to what I need and I may end up modifying it if I cant find anything else but it is for a program 1 version newer and a table without a z axis which I have on mine