**CONTEST HAS ENDED** - EasyScriber Giveaway
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1946
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: EasyScriber Giveaway
Boy, sure lots of non-elites again this time around.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 1/2 Star Member
- Posts: 7
- Joined: Sat May 18, 2019 6:37 pm
Re: EasyScriber Giveaway
Percision plasma DIY 5 x 10 powerMax 45 XP
-
- 1/2 Star Member
- Posts: 3
- Joined: Fri May 31, 2019 8:43 pm
- Location: Northwest Arkansas
Re: EasyScriber Giveaway
Cutting Edge Plasma 4x4
Hypertherm Powermax 65
Hypertherm Powermax 65
Matt
Cutting Edge Plasma 4x4
Hypertherm Powermax 65
HTP Invertig 221
Hobart Handler 190
Inkscape / Qcad / Sheetcam / Fusion 360
Grizzly G4003g
Grizzly G0759
Cutting Edge Plasma 4x4
Hypertherm Powermax 65
HTP Invertig 221
Hobart Handler 190
Inkscape / Qcad / Sheetcam / Fusion 360
Grizzly G4003g
Grizzly G0759
-
- 3.5 Star Elite Contributing Member
- Posts: 363
- Joined: Sun Dec 13, 2009 8:59 pm
- Location: Tacoma, Wa.
Re: EasyScriber Giveaway
PlasmaCam DHC2
Hypertherm 1000
Hypertherm 1000
-
- 2.5 Star Member
- Posts: 122
- Joined: Fri Oct 21, 2016 10:41 pm
Re: EasyScriber Giveaway
Homebuilt 4x4 with CandCNC controls with a Thermal Dynamics Cutmaster 42
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
-
- 1.5 Star Elite Contributing Member
- Posts: 74
- Joined: Fri Mar 08, 2013 7:11 pm
Re: EasyScriber Giveaway
Hypertherm 85 and Westcott 4x4
-
- 1/2 Star Member
- Posts: 2
- Joined: Fri May 31, 2019 3:55 pm
Re: EasyScriber Giveaway
Hypertherm 45xp Crossfire table
-
- 1/2 Star Member
- Posts: 1
- Joined: Wed Mar 27, 2019 10:05 pm
Re: EasyScriber Giveaway
Hypertherm 45xp Premier Plasma 4x4
-
- 2.5 Star Member
- Posts: 105
- Joined: Thu Mar 15, 2018 6:14 am
Re: EasyScriber Giveaway
45xp with premier plasma table. Crossing my fingers this time
-
- 1/2 Star Member
- Posts: 8
- Joined: Tue Dec 11, 2018 6:35 am
Re: EasyScriber Giveaway
Hypertherm 45 Hypertherm 45XP Hypertherm 380, Bulltear/Star Labs 5x10 and an orphan 5 by 8. CANDCNC on 5x10 and Mach 3 on 5 x 8 Sheetcam on both.
Thanks for supporting the wealth of info here. Doug
Thanks for supporting the wealth of info here. Doug
-
- 1/2 Star Member
- Posts: 1
- Joined: Wed Mar 27, 2019 1:11 pm
Re: EasyScriber Giveaway
Wright CNC, Hypertherm PM 65
-
- 2.5 Star Member
- Posts: 105
- Joined: Thu Mar 15, 2018 6:14 am
Re: EasyScriber Giveaway
If ya ain't got a spider by your name don't enter.
-
- 1/2 Star Member
- Posts: 2
- Joined: Wed Apr 25, 2018 12:30 pm
Re: EasyScriber Giveaway
Shopsabre sidekick 4 X 8 with a Hypertherm 65
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1946
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: EasyScriber Giveaway
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 1/2 Star Member
- Posts: 9
- Joined: Tue Dec 04, 2018 1:06 am
Re: EasyScriber Giveaway
Hypertherm Powermax45 XP Plasma CamDHC2
-
- 1/2 Star Member
- Posts: 3
- Joined: Sat Jan 19, 2019 6:47 pm
Re: EasyScriber Giveaway
HYPERTHERM 85 HOME BREW TABLE
- dgraves
- 1.5 Star Elite Contributing Member
- Posts: 47
- Joined: Tue Mar 23, 2010 1:56 pm
Re: EasyScriber Giveaway
DynaCNC and Hypertherm Powermax 65
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: EasyScriber Giveaway
Hyperherm 1250 with Duramax Torch and Home Built 4x8 V-Rail with steppers.
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
-
- 2 Star Member
- Posts: 70
- Joined: Wed May 15, 2019 8:12 am
Re: EasyScriber Giveaway
Powermax 65 with a home built 5 x 10 table
-
- 1/2 Star Member
- Posts: 6
- Joined: Sun Aug 28, 2016 7:36 am
Re: EasyScriber Giveaway
PowerMax 65 on a 4x4 Precision Plasma / CandCNC table.
-
- 1 Star Member
- Posts: 10
- Joined: Sun Aug 26, 2018 12:06 am
Re: EasyScriber Giveaway
Hypertherm powermax 65 with a 4x8 fast cut icon elite table
- EasyScriber
- 2.5 Star Member
- Posts: 163
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
Re: EasyScriber Giveaway
Good Morning Everyone!
Today we have randomly selected the winner from the eligible entries and the winner is................................
IBBruin
Congratulation IBBruin and for all the other Elite members please stayed tuned as we will be giving another one away shortly.
If you just can't wait and need to have your own EasyScriber now please visit this link https://theeasyscriber.com/products.html
Have a great week everyone!
Today we have randomly selected the winner from the eligible entries and the winner is................................
IBBruin
Congratulation IBBruin and for all the other Elite members please stayed tuned as we will be giving another one away shortly.
If you just can't wait and need to have your own EasyScriber now please visit this link https://theeasyscriber.com/products.html
Have a great week everyone!
-
- 2 Star Member
- Posts: 86
- Joined: Fri Oct 20, 2017 11:49 am
- Location: Just south of Tupelo
Re: EasyScriber Giveaway
Thank you!
Now to come up with projects!
Now to come up with projects!
Darryl
Gorilla 48x48
PM 65
Aspire 9.015
Gorilla 48x48
PM 65
Aspire 9.015
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 501
- Joined: Thu Jan 07, 2010 11:38 pm
Re: EasyScriber Giveaway ***WINNER SELECTED***
Congrats IBBruin.