Does anyone have any good ideas for movable sheet storage? I am thinking of building or buying a cart to have my stock in a bit better organization.
Post pics and ideas!
Sheet Storage ideas?
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 811
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Sheet Storage ideas?
Here's one my brother did that seems to be working well.
https://plasmaspider.com/viewtopic.php?f=89&t=27397
https://plasmaspider.com/viewtopic.php?f=89&t=27397
I think I'm the oldest 10 year old boy on the forum...
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1671
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Sheet Storage ideas?
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- SegoMan DeSigns
- 4 Star Member
- Posts: 858
- Joined: Sat Jan 06, 2018 4:45 pm
Re: Sheet Storage ideas?
You could do a multi-tear trailer with a roller up front for ease of moving.
My envisioned design will be to find a shipping container with side doors and sliding shelves for each material gauge. Pick up horizontal sheets with spreader bar and trolley to table.
Here's a couple of vids for ideas:
https://www.youtube.com/watch?v=z9hYZXt3KuM
https://www.youtube.com/watch?v=FrrYpCwV220
My envisioned design will be to find a shipping container with side doors and sliding shelves for each material gauge. Pick up horizontal sheets with spreader bar and trolley to table.
Here's a couple of vids for ideas:
https://www.youtube.com/watch?v=z9hYZXt3KuM
https://www.youtube.com/watch?v=FrrYpCwV220
-
- 1 Star Member
- Posts: 14
- Joined: Tue Jul 24, 2018 10:45 pm
Re: Sheet Storage ideas?
I have been trying to figure out a solution for my shop too. I was thinking about a vertical rack on a u-boat type cart. (Think big box stores material cart with taller wheels in the middle and casters at both ends). Was thinking 18-20 wide with 4 slots. Mainly for 1/4 and under. Anything heavier doesn't need wheels. I don't anticipate stocking more than 1-2 sheets in any size. Only concern is tipping it over being that narrow.
Dan
Dan