What is best way to paint/coat new BIG table tub
-
- 1 Star Member
- Posts: 10
- Joined: Tue Mar 13, 2018 4:06 pm
What is best way to paint/coat new BIG table tub
We are building a 11'x60' table and wanted to know what is the best way to coat the inside tank. What do you guys put on the tank to prevent rust and if you paint the tub does it affect the ground.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7803
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: What is best way to paint/coat new BIG table tub
I use a rustoleum plus hardener and stray the tanks, slats, supports, and frames on the table I built. works great
https://www.youtube.com/watch?v=2uMmNFOH6EY
I also clamp directly to the metal being cut with the Plasma work lead.
https://www.youtube.com/watch?v=2uMmNFOH6EY
I also clamp directly to the metal being cut with the Plasma work lead.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1 Star Member
- Posts: 12
- Joined: Fri Jan 18, 2013 4:04 pm
Re: What is best way to paint/coat new BIG table tub
I'm getting ready to build a new water table myself and I'll be using a two part epoxy paint.. getting it free from a friend that is a contractor through a company that builds and repairs water tanks and towers..