I'm hoping you guys can help me with my old age memory problem. I was involved in a post a couple (maybe 3 or 4) months ago regarding attaching 2 pieces of metal for the layering effect. Someone told me about an adhesive tape where you apply the tape to the piece and then remove it, and it leaves only the adhesive on the metal parts that it touches. I have searched this site, google and amazon trying to locate that product and can't seem to find it. I can't remember what it was called but I think it was something that was typically used for car trim or something to that affect.
I went back thru all of my posts and can't seem to find it. I don't want the double sided tape. Although similar, this other product only left the adhesive behind so you didn't have to trim anything that might otherwise show.
If anyone knows what I'm talking about, please, please remind me of the product name. Thanks!
Help with memory loss... lol (Actually layering effect)
-
- 2.5 Star Member
- Posts: 113
- Joined: Sun Jun 03, 2018 2:22 pm
Help with memory loss... lol (Actually layering effect)
LDR 4'x4' Water Table
Command CNC Linux Controller
Plate Marker
Power Max 45xp w/ Machine Torch & Hand Torch
2 Stage filter, Motorguard filter & HF Ref Dryer
InkScape / SheetCam
Command CNC Linux Controller
Plate Marker
Power Max 45xp w/ Machine Torch & Hand Torch
2 Stage filter, Motorguard filter & HF Ref Dryer
InkScape / SheetCam
-
- 4 Star Elite Contributing Member
- Posts: 996
- Joined: Thu Nov 21, 2013 5:32 pm
Re: Help with memory loss... lol (Actually layering effect)
3m mounting tape..part #03410
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1939
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Help with memory loss... lol (Actually layering effect)
If you click on the 3 line icon at the top left of the page and click your posts you will see all of the topics you posted to. Maybe that will help jog your memory.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7793
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Help with memory loss... lol (Actually layering effect)
the product you may be looking for is a cell phone screen tape, I works like double sided tape but is very thin like you said just the adhesive.
https://www.ebay.com/itm/Double-Sided-3 ... ZdBDyLd-uA
There are other suppliers listed on eBay too
https://www.ebay.com/itm/Double-Sided-3 ... ZdBDyLd-uA
There are other suppliers listed on eBay too
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2.5 Star Member
- Posts: 113
- Joined: Sun Jun 03, 2018 2:22 pm
Re: Help with memory loss... lol (Actually layering effect)
Thanks everyone. I did go back through all of my previous posts and couldn't find anything but I'm sure it was a discussion in this group. I looked at the 3M Mounting tape but I don't think that was it. The description makes it sound like it's another double sided tape which means that you would have to trim it if you use it on small pieces.
I think the cell phone screen tape that acourtjester mentioned is the one I was looking for. Reading through the description it sounds like it anyway. Unfortunately they think highly of their product. lol I'm still going to order a roll and give it a try.
Thanks again for the assistance.
I think the cell phone screen tape that acourtjester mentioned is the one I was looking for. Reading through the description it sounds like it anyway. Unfortunately they think highly of their product. lol I'm still going to order a roll and give it a try.
Thanks again for the assistance.
LDR 4'x4' Water Table
Command CNC Linux Controller
Plate Marker
Power Max 45xp w/ Machine Torch & Hand Torch
2 Stage filter, Motorguard filter & HF Ref Dryer
InkScape / SheetCam
Command CNC Linux Controller
Plate Marker
Power Max 45xp w/ Machine Torch & Hand Torch
2 Stage filter, Motorguard filter & HF Ref Dryer
InkScape / SheetCam