New guy and sheetcam
-
- 1 Star Member
- Posts: 22
- Joined: Sun May 27, 2018 7:59 am
New guy and sheetcam
Hello, I'm a newbie looking for advice. I recently bought an Arclight dynamics 4×8 table and am trying to set up sheetcam on a second computer. Arclight has given me directions on how to save the tool sets and info from the plasma table computer and I have attempted to install correctly. I have been able to follow everything until now, the tool sets are there and the license is installed I believe but I have no operations available. In the operations tab they are just light grey and I cant select anything. In their directions I am at the point of importing a file and selecting a plasma operation but I can't do that. Any help is appreciated!
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: New guy and sheetcam
Sounds like you might be in nesting mode, try it with the other modes to the left, it would be great if the same options in nesting mode were available as the other modes (hint, hint Les! )
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 1 Star Member
- Posts: 22
- Joined: Sun May 27, 2018 7:59 am
Re: New guy and sheetcam
Thanks Sean, I'll try it again when I get a chance.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7794
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: New guy and sheetcam
try this
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1 Star Member
- Posts: 22
- Joined: Sun May 27, 2018 7:59 am
Re: New guy and sheetcam
Thank you, I got it