New guy and sheetcam

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
MS76
1 Star Member
1 Star Member
Posts: 22
Joined: Sun May 27, 2018 7:59 am

New guy and sheetcam

Post by MS76 »

Hello, I'm a newbie looking for advice. I recently bought an Arclight dynamics 4×8 table and am trying to set up sheetcam on a second computer. Arclight has given me directions on how to save the tool sets and info from the plasma table computer and I have attempted to install correctly. I have been able to follow everything until now, the tool sets are there and the license is installed I believe but I have no operations available. In the operations tab they are just light grey and I cant select anything. In their directions I am at the point of importing a file and selecting a plasma operation but I can't do that. Any help is appreciated!
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: New guy and sheetcam

Post by SeanP »

Sounds like you might be in nesting mode, try it with the other modes to the left, it would be great if the same options in nesting mode were available as the other modes (hint, hint Les! )
sc.png

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
MS76
1 Star Member
1 Star Member
Posts: 22
Joined: Sun May 27, 2018 7:59 am

Re: New guy and sheetcam

Post by MS76 »

Thanks Sean, I'll try it again when I get a chance.
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: New guy and sheetcam

Post by acourtjester »

try this
sheetcam.JPG

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
MS76
1 Star Member
1 Star Member
Posts: 22
Joined: Sun May 27, 2018 7:59 am

Re: New guy and sheetcam

Post by MS76 »

Thank you, I got it
Post Reply

Return to “CNC Plasma Cutters General Forum”