Would like to build an arm to support my torch cable overhead I have some ideas anybody have any good pics or designs they used?
Thnaks
ed92254
Torch Overhead Support
- Ironken
- 3 Star Member
- Posts: 322
- Joined: Thu Nov 30, 2017 7:29 pm
Re: Torch Overhead Support
Here's what I did on my old machine. A couple swivel clips, key ring, and some conduit hangers.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 105
- Joined: Thu Mar 15, 2018 6:14 am
Re: Torch Overhead Support
I really like how my premier plasma is set up. If you can find one of these flexi things. Maybe call Jake at PP.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1938
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Torch Overhead Support
Cable chain. You can buy different sizes online.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Torch Overhead Support
Attached is an image of a torch cable support I have used on about 4 tables I built, the end pivoting section is a must to allow the cable to cover the extreme reach to the 4 corners.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: Torch Overhead Support
Here's a picture of my overhead torch cable support. It's a bit confusing because the table is set up for laser engraving right now so the magnetic torch mount is just stuck to the Z axis motor for the picture. But basically it's just a length of 1 inch conduit with the torch cable routed thru it. It rotates on a ball bearing mount on the side of the table.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Sep 17, 2018 5:31 pm
Re: Torch Overhead Support
Thanks for the ideas guys