It is currently Sun Nov 18, 2018 3:50 pm


Hypertherm ProNest vs. Messer Global Control

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
Posts: 1
Joined: Tue Jul 31, 2018 5:04 pm

Hypertherm ProNest vs. Messer Global Control

Postby grimes.jason.w » Tue Jul 31, 2018 5:10 pm

Hi all and thanks for what you do on the site. I have a question regarding nesting software and controllers. Currently our shop uses ProNest from hypertherm for our nesting and controller needs, we are upgrading our equipment in the very near future to a messer machine which has it's own control, the messer global control.

Can anyone here speak to the differences in the 2 and what will it take on our end as a company to switch all of our files, 10000+ from ProNest over to Global Control? We work from .dxf files and send the cut files to the machines as .cnc

Elite Contributing Member
Elite Contributing Member
Posts: 2946
Joined: Mon Jul 20, 2009 11:18 pm
Location: New Hampshire

Re: Hypertherm ProNest vs. Messer Global Control

Postby jimcolt » Thu Aug 09, 2018 7:21 am

The Global Control is from Messer Cutting Systems Inc., I think the best answer to your question will come from Messer. You should be able to continue using Pro-Nest with the Messer machine, and that is what I strongly recommend. Jim Colt Hypertherm

Return to “CNC Plasma Cutters General Forum”

Who is online

Users browsing this forum: No registered users and 17 guests

Easyscriber engrave attachment for Hypertherm torch's