Easyscriber engrave attachment for Hypertherm torch's

Sequential numbering for placards

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
Post Reply
Posts: 64
Joined: Sat Apr 01, 2017 5:38 pm

Sequential numbering for placards

Post by rbmgf7 » Wed May 23, 2018 11:15 am

Wondering if anyone has a tip on how to generate sequential numbers. I had someone ask if I could cut door numbers, from one to two hundred, with the possibility of having the company logo on the placard.

I know the hard way to do it but was wondering if anyone has an easier solution.

I used CorelDraw8 and Fusion360.

User avatar
SegoMan DeSigns
Elite Contributing Member
Elite Contributing Member
Posts: 163
Joined: Sat Jan 06, 2018 4:45 pm

Re: Sequential numbering for placards

Post by SegoMan DeSigns » Wed May 23, 2018 12:08 pm

I don't think 8 has a merge file option.

If it does you make a template with the logo on it then then link it to a database, in this case an Excel spreadsheet. In Excel you start a numbering sequence and finish it with a copy & special paste command. Hit merge and the magic happens. Sounds Simple Right?

Posts: 1099
Joined: Tue Feb 28, 2012 6:47 pm

Re: Sequential numbering for placards

Post by tcaudle » Thu May 24, 2018 9:40 am

There may be a sequential numbering plugin for CorelDraw. Have a look at this one says it does automatic numbering and uses a database

http://macromonster.com/product/alexand ... lestool-2/

User avatar
Posts: 68
Joined: Tue Nov 22, 2016 8:59 pm
Location: Schofield, WI USA

Re: Sequential numbering for placards

Post by lockeyone » Thu May 24, 2018 9:58 am

You also try searching the internet for "Print Merge"
Table 4'x4', BladeRunner EtherCut 620 LINUX w/CommandCNC
Hypertherm 65 CPC/RS485 Machine torch 2016
BobCad router 50"x50" MACH3 2kw spindle 2003
Shoptask Eldorado cnc MACH3, 1999
Epilog Mini 24 60watt, 2013
Vectric Aspire CoralDraw x6 SheetCam

Posts: 160
Joined: Sun Jan 12, 2014 2:30 pm

Re: Sequential numbering for placards

Post by islander261 » Thu May 24, 2018 10:20 am

It will require some hand editing of a base file but there are plenty of Gcode subroutines floating around for generating sequential numbering.


Post Reply

Return to “CNC Plasma Cutters General Forum”