Easyscriber engrave attachment for Hypertherm torch's
 

Steel supplier in northern california?

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
Post Reply
Rough-n-Ready
Posts: 5
Joined: Mon Oct 16, 2017 2:36 pm

Steel supplier in northern california?

Post by Rough-n-Ready » Mon Feb 05, 2018 7:23 pm

Can anyone recommend a steel supplier in the sacramento area? I'm actually in Grass Valley, but I figure i'll probably have to go to sacramento to find a good one.

Thanks!

DaltonMurphy
Posts: 22
Joined: Wed Feb 14, 2018 3:31 pm

Re: Steel supplier in northern california?

Post by DaltonMurphy » Thu Feb 15, 2018 9:00 am

Valley Iron, Samuel, Reliance. Im in sacramento, just ordered an 11ga HR sheet for $100 from valley iron last night

Rough-n-Ready
Posts: 5
Joined: Mon Oct 16, 2017 2:36 pm

Re: Steel supplier in northern california?

Post by Rough-n-Ready » Thu Feb 15, 2018 10:34 pm

I ended up going to Gerlinger in Woodland (quite a drive) but I got 16ga CR at $53 a sheet, 12ga at $89 a sheet and 1/4" for $197. All 4x8 CR.
About 64 cents a pound.
I'll have to get quotes from those places too. Thanks!
Last edited by Rough-n-Ready on Fri Feb 16, 2018 1:02 pm, edited 1 time in total.

DaltonMurphy
Posts: 22
Joined: Wed Feb 14, 2018 3:31 pm

Re: Steel supplier in northern california?

Post by DaltonMurphy » Fri Feb 16, 2018 8:26 am

Yeah all the other places will deliver as well.

DaltonMurphy
Posts: 22
Joined: Wed Feb 14, 2018 3:31 pm

Re: Steel supplier in northern california?

Post by DaltonMurphy » Fri Feb 16, 2018 8:27 am

Do you have a shop or do you just do side plasma work???

Rough-n-Ready
Posts: 5
Joined: Mon Oct 16, 2017 2:36 pm

Re: Steel supplier in northern california?

Post by Rough-n-Ready » Fri Feb 16, 2018 10:42 am

Just in the side. Gerlinger delivers up here but wouldn’t deliver to my house because they wouldn’t be able to turn their truck around.

2015cmax
Elite Contributing Member
Elite Contributing Member
Posts: 45
Joined: Fri Apr 15, 2016 6:31 pm

Re: Steel supplier in northern california?

Post by 2015cmax » Fri Feb 16, 2018 10:57 am

Thought I would just put this out for comparison. Just bought a few sheets in the Los Angeles area from Industrial Metal Supply, Delivered
1/4" 4x8 HR. $224.32

16ga 4x8 CR. $56.80

User avatar
see&see
Elite Contributing Member
Elite Contributing Member
Posts: 190
Joined: Tue Jun 24, 2014 12:04 pm
Location: Minden, Nevada

Re: Steel supplier in northern california?

Post by see&see » Fri Feb 16, 2018 6:05 pm

Farwest Steel Stockton CA They ship most places free and here in Nevada coming from Stockton they cut PDM's Nevada prices almost in half.
PlasmaCam DHC2 4 x 4 & Sampson 510 Snap 'n Cut w/Safety Switch Interface Hypertherm 85 & 45XP

netdude
Posts: 1
Joined: Tue Apr 04, 2017 1:09 pm

Re: Steel supplier in northern california?

Post by netdude » Fri Feb 23, 2018 4:03 pm

Del Paso Pipe & Steel
Address: 5519 Raley Blvd., Sacramento, CA 95838
Email: [email protected]
Phone: (916) 992-6500

Northern Sac area off I-80

Post Reply