Easyscriber engrave attachment for Hypertherm torch's
 

Table decision

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
Post Reply
Alpiner
Posts: 4
Joined: Mon Jan 08, 2018 4:21 pm

Table decision

Post by Alpiner » Thu Jan 11, 2018 2:48 am

Hi,
I am in Australia and looking at buying a table hoping to do a bit of work from home, I am thinking most of my work would be with lighter material maybe the occasional 3/8th so I was planning on a Hypertherm 45 (single phase power only)

I would really appreciate your advice on a few of the tables I have narrowed it down to

TIA
John
FE051229-5173-41F3-BE10-B216DA6D01AF.png
8AE29C6C-E1B5-4B75-BDC4-52F85A4DD8EC.png
369F32B9-F75F-4F9A-8957-58BF43515087.jpeg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


Alpiner
Posts: 4
Joined: Mon Jan 08, 2018 4:21 pm

Re: Table decision

Post by Alpiner » Thu Jan 11, 2018 2:56 am

This is another one I looked at, Chinese I am pretty sure
E371E9D5-B6AA-42DD-A6E3-664A4617B5CD.jpeg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


Mtw fdu
Posts: 198
Joined: Sat Dec 20, 2014 3:12 am
Location: Barossa Valley, South Australia

Re: Table decision

Post by Mtw fdu » Thu Jan 11, 2018 3:20 pm

John

I am in Australia as well and have the Powermax 45 myself.

I have had my power updated with 10mm cable from my main power box from the house to my shed and use 2 15 amp power plugs at the same time (1 for plasma and the other for air compressor). I have had no issues with also cutting 12mm (on odd occasions) as well.

My power was only 4mm cable which would not hold up so I went with the extra than 6mm than first planned.

Even though I have dealt with Machinery House with other machinery I went to the USA to get my table as I had a smaller budget.

Hope this helps.


Mtw fdu.
Camcutcnc 2 x 2 plasma cutter with UC 100 Motion Controller
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis

Alpiner
Posts: 4
Joined: Mon Jan 08, 2018 4:21 pm

Re: Table decision

Post by Alpiner » Sun Jan 14, 2018 2:52 pm

Thanks mate I ended up buying a plasmacam DHC 2 with a Hypertherm 45, now I hope I don’t have to update my power to the shed

Mtw fdu
Posts: 198
Joined: Sat Dec 20, 2014 3:12 am
Location: Barossa Valley, South Australia

Re: Table decision

Post by Mtw fdu » Mon Jan 15, 2018 5:28 am

Keep us posted when it arrives and you are making sparks.

Mtw fdu.
Camcutcnc 2 x 2 plasma cutter with UC 100 Motion Controller
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis

Post Reply