Easyscriber engrave attachment for Hypertherm torch's

CNC Laser

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
Post Reply
Posts: 484
Joined: Sun Mar 27, 2011 10:13 pm

CNC Laser

Post by Dawgonhawg » Thu Nov 02, 2017 11:33 am

Guys know this is primary CNC Plasma site which that is what a have. A antique Dynatorch which still works good.
Looking for recommendations for a CNC laser machine. Your input will be appreciated.


Posts: 1059
Joined: Tue Feb 28, 2012 6:47 pm

Re: CNC Laser

Post by tcaudle » Thu Nov 02, 2017 12:17 pm

For cutting what? If its metal then prices start around 250K and go up to 1.5M,

Posts: 34
Joined: Sun Jan 14, 2018 10:31 pm

Re: CNC Laser

Post by Greg_R » Mon Jan 15, 2018 4:13 am

80 watt laser for wood? Sinjoe for sure. Servo motors and best controllers, and best price. I was referred them by Dave over at Sawmillcreek forums. He seems to be the laser guru there.

Posts: 22
Joined: Wed Feb 14, 2018 3:31 pm

Re: CNC Laser

Post by DaltonMurphy » Fri Feb 16, 2018 8:33 am

find a used amada laser 15-20k reliable good service techs and u can do metal or wood.

Posts: 4
Joined: Mon Nov 13, 2017 8:59 am

Re: CNC Laser

Post by mrd0477 » Fri Feb 23, 2018 10:03 pm

Im building a new table that will house a 150w co2 and im using the sinjoe controller. Im going to attempt to have it operate the plasma torch under the 2nd laser. If it all works, yay me. If not, Ill be building a 3rd table lol.

Posts: 32
Joined: Tue Feb 17, 2009 4:26 pm

Re: CNC Laser

Post by ROCKY » Sun Feb 25, 2018 2:59 pm

I use a TRUMPF 1030 tru-laser at work. 2000 watt CO2 laser.
Great machine, easy programming, excellent company support.
1/2in capacity steel 1/4 in stainless. Cuts like a razor blade.
Note: Not made by our president...LOL

Post Reply