Easyscriber engrave attachment for Hypertherm torch's
 

SIZING PROBLEM

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.
Post Reply
FamilyFab
Posts: 2
Joined: Wed Feb 14, 2018 4:56 pm

SIZING PROBLEM

Post by FamilyFab » Tue Feb 20, 2018 2:08 pm

First off I'm new at this just learning my way. I am having a problem when transferring work from one program to another. I'm designing in torchmate cad lite 9. but when I transfer it to torchmate 4 to cut it the sizing is not the same. It doubles the height and divides the width in half. Any help would be greatly appreciated.

User avatar
larrycameron44
Elite Contributing Member
Elite Contributing Member
Posts: 562
Joined: Sun Oct 31, 2010 4:12 pm
Location: Auckland New Zealand

Re: SIZING PROBLEM

Post by larrycameron44 » Wed Feb 21, 2018 9:23 pm

It’s a easy fix from memory, email Torchmate and they will help or join Fabrication Forum and pose question there.
https://www.fabricationforum.com/

Larry Cameron
RusticMetalArt

FamilyFab
Posts: 2
Joined: Wed Feb 14, 2018 4:56 pm

Re: SIZING PROBLEM

Post by FamilyFab » Thu Feb 22, 2018 6:57 pm

OK THANKS. larrycameron44

Post Reply