Hypertherm PM65 error code 0-19

Discussion on 0-30 fault codes
Post Reply
barefoot3zk5
1/2 Star Member
1/2 Star Member
Posts: 9
Joined: Mon Mar 22, 2010 10:12 am

Hypertherm PM65 error code 0-19

Post by barefoot3zk5 »

My machine has been down since Wednesday with error code 0-19.. changes to 0-99 after awhile ..
after phone with tech at HT we go thru trouble shoot test 5 on flyback circuit .. seems to conclude that DSP board is the issue .. overnight and replace on friday but no fix so back on phone and again conclude pressure switch is culprit .. again overnight w Saturday delivery and replace but doesn't seem to help ... after piddlin off and on machine comes on with no error code 0-19 so Im thinkin success .. Ha .. short lived as I cut for perhaps 30 min thinkin Im gonna catch up on back log over weekend ... wrong .. machine throws code 0-19 again and has yet to re set without code .. obviously I will be on Tech support Monday but jus wonderin if ANYBODY can shed some light on my dilemma ??? overnightin and down time , is killin me ..lol .. Thanx Howard in Ms
sphurley
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 445
Joined: Sat Jul 04, 2015 10:43 pm

Re: Hypertherm PM65 error code 0-19

Post by sphurley »

Is the table and machine well grounded?
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Ianb007
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Wed Mar 24, 2021 12:32 pm

Re: Hypertherm PM65 error code 0-19

Post by Ianb007 »

What was the issue in the end for the 01-19 error?
Post Reply

Return to “0-19 Fault Code”