Flashcut hotkeys

[kustomshoebox]

Hi Folks,
I've been searching for a cheat sheet if you will, of the hot keys or key board commands for a flashcut controller. I recently purchased and recieved a fab-cut 5x10 (very pleased so far) but i want to run it with a gamming style controller, which i already have. But to map the controller i would like to have a hot keys list. Does anyone have one, or know where to find one? Niether flashcut or fab-cut have them listed.

[adbuch]

1949 - 1951 Ford?

[FlashCut CNC]

The hot keys are intended to be used as a shortcut for various machine operations. FlashCut does not recommend it for productions because it adds another layer as each keystroke is translated to a machine command and sent to the CNC controller. FlashCut and their OEMs/distributors offer a Joystick pendant which gives direct machine commands to the controller per joystick moves or keyboard presses. A gaming console is not recommended for regular use as it does keyboard emulation which is not as reliable as direct machine commands.

Here are the CNC shortcuts:

CNC Shortcuts.jpg

Here are the CAD/CAM shortcuts:

CADCAM Shortcuts.png

USB Pendant Hardware and Setup Manual.pdf

[adbuch]

Here are the CNC shortcuts:


CNC Shortcuts.jpg



Here are the CAD/CAM shortcuts:


CADCAM Shortcuts.png

Thanks for providing those! Hopefully the OP will be back soon to check them out.
David