Image
AUGUST EasyScriber Giveaway!
Industry Pros use FastCut CNC

Flashcut hotkeys

FlashCut CNC plasma controllers and CAD/CAM software
Post Reply
kustomshoebox
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Fri Jun 19, 2020 5:22 pm

Flashcut hotkeys

Post by kustomshoebox » Tue Feb 08, 2022 12:14 pm

Hi Folks,
I've been searching for a cheat sheet if you will, of the hot keys or key board commands for a flashcut controller. I recently purchased and recieved a fab-cut 5x10 (very pleased so far) but i want to run it with a gamming style controller, which i already have. But to map the controller i would like to have a hot keys list. Does anyone have one, or know where to find one? Niether flashcut or fab-cut have them listed.

adbuch
5.5 Star Elite Contributing Member
5.5 Star Elite Contributing Member
Posts: 5209
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Flashcut hotkeys

Post by adbuch » Wed Feb 09, 2022 12:16 am

1949 - 1951 Ford?

FlashCut CNC
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Wed Dec 23, 2020 2:28 pm

Re: Flashcut hotkeys

Post by FlashCut CNC » Wed Feb 09, 2022 10:59 am

The hot keys are intended to be used as a shortcut for various machine operations. FlashCut does not recommend it for productions because it adds another layer as each keystroke is translated to a machine command and sent to the CNC controller. FlashCut and their OEMs/distributors offer a Joystick pendant which gives direct machine commands to the controller per joystick moves or keyboard presses. A gaming console is not recommended for regular use as it does keyboard emulation which is not as reliable as direct machine commands.

Here are the CNC shortcuts:

CNC Shortcuts.jpg


Here are the CAD/CAM shortcuts:

CADCAM Shortcuts.png

USB Pendant Hardware and Setup Manual.pdf

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here


adbuch
5.5 Star Elite Contributing Member
5.5 Star Elite Contributing Member
Posts: 5209
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Flashcut hotkeys

Post by adbuch » Wed Feb 09, 2022 11:12 pm

FlashCut CNC wrote:
Wed Feb 09, 2022 10:59 am
Here are the CNC shortcuts:


CNC Shortcuts.jpg



Here are the CAD/CAM shortcuts:


CADCAM Shortcuts.png
Thanks for providing those! Hopefully the OP will be back soon to check them out.
David

Post Reply

Return to “FlashCut CNC”

Industry Pros use FastCut CNC