EasyScriber for Thermal Dynamics, Victor, & Esab
- EasyScriber
- 2.5 Star Member
- Posts: 163
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
EasyScriber for Thermal Dynamics, Victor, & Esab
We have had a lot of interest in the EasyScriber for the A40, A40i, A60, A60i, A80, & A120 plasma cutters and it has finally been released!
Available for purchase from EasyScriber or PlasmaSpider this is a MUST HAVE tool for any plasma table owner!
Contact us with any questions and most of all have fun!
Available for purchase from EasyScriber or PlasmaSpider this is a MUST HAVE tool for any plasma table owner!
Contact us with any questions and most of all have fun!
- rrossetti
- 1.5 Star Member
- Posts: 26
- Joined: Thu Apr 17, 2014 4:34 pm
- Location: uk
- Contact:
Re: **NEW** EasyScriber for Thermal Dynamics, Victor, & Esab
What about the original powermax 45
-
- 6 Star Elite Contributing Member
- Posts: 8705
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: **NEW** EasyScriber for Thermal Dynamics, Victor, & Esab
I bought one for my Hyertherm Duramax torch last year, but haven't had occasion to use it yet. Since I already have the Plasmacam engraving attachment - I probably didn't really need this. But it looks nice in the tool box drawer.
David
David
- EasyScriber
- 2.5 Star Member
- Posts: 163
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
Re: **NEW** EasyScriber for Thermal Dynamics, Victor, & Esab
Wish we could make it work in the smaller 45 torch, so many folks interested but there is just not enough room. With the duramax torch upgrade you can use it.
-
- 6 Star Elite Contributing Member
- Posts: 8705
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: **NEW** EasyScriber for Thermal Dynamics, Victor, & Esab
I've got the 45xp and 85 - both have the Duramax torch. It will fit in both, I just haven't used it yet. But it looks nice in the tool drawer next to my Hyperhterm consumables.
David
David
- EasyScriber
- 2.5 Star Member
- Posts: 163
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
- _jay_
- 1.5 Star Member
- Posts: 37
- Joined: Fri Feb 14, 2020 4:26 am
Re: **NEW** EasyScriber for Thermal Dynamics, Victor, & Esab
Do these fit a TECMO torch ?
The learning curve is exponential AKA "never ends " !
- EasyScriber
- 2.5 Star Member
- Posts: 163
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
- _jay_
- 1.5 Star Member
- Posts: 37
- Joined: Fri Feb 14, 2020 4:26 am
Re: **NEW** EasyScriber for Thermal Dynamics, Victor, & Esab
i'm a little surprised as what i understood is TD torches and TEcmo are the same.
I'm getting a plasma generator with the Tecmo PM70 torch, and the TD45 torch consumables fit, and are the same reference.
I'm getting a plasma generator with the Tecmo PM70 torch, and the TD45 torch consumables fit, and are the same reference.
The learning curve is exponential AKA "never ends " !
- EasyScriber
- 2.5 Star Member
- Posts: 163
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
Re: **NEW** EasyScriber for Thermal Dynamics, Victor, & Esab
We have not actually tried to fit the scribe to the Tecmo torch however upon your original request we looked into the Tecmo torch and found that the consumables look nothing like TD consumables. In fact if anything they look like a knock off of the Hypertherm style consumable set, please see below what we found.
-
- 1/2 Star Member
- Posts: 1
- Joined: Mon Feb 24, 2020 9:44 am
Re: **NEW** EasyScriber for Thermal Dynamics, Victor, & Esab
What does this do to the warranty of the Hypertherm torch?
- EasyScriber
- 2.5 Star Member
- Posts: 163
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
EasyScriber for Thermal Dynamics, Victor, & Esab
You would be best to contact Hypertherm for their official response. I can say though that the pressure applied to the torch is very minimal. See this video below.snowgoer540 wrote: ↑Mon Jun 08, 2020 11:53 am What does this do to the warranty of the Hypertherm torch?