Trick to secure parts to the table for scribing

All topics related specifically to the EasyScriber drag style scribe & engraving tool.
Post Reply
User avatar
EasyScriber
2.5 Star Member
2.5 Star Member
Posts: 161
Joined: Thu Dec 13, 2018 2:13 pm
Contact:

Trick to secure parts to the table for scribing

Post by EasyScriber »



This is a great way to secure large, pre-cut, pre-painted parts to your cutting table for scribing. In most cases you can scribe before cutting the outer profile out of the plate, or hold smaller parts in a vise but for this pre-painted project we needed a different solution. This technique works great.
Dishtech55
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 95
Joined: Tue Oct 02, 2018 9:21 pm
Location: Central Illinois
Contact:

Re: Trick to secure parts to the table for scribing

Post by Dishtech55 »

Great Ideal.. will have to try that.. thanks...
4x10 Home Built Super Table.
4x4x6` Home Built LP Powder Coat oven
Hypertherm 45 xp plasma cutter
Eastwood 60 amp Plasma Cutter
Eastwood Powder Coating Gun
Miller 252 Mig with Spool Gun
Lincoln 100 Mig
Build Trailers
Post Reply

Return to “EasyScriber Drag Style Scriber for Hypertherm”