Hi guys and girls,
New from Australia, recently built myself a water table plasma using an Australian company for the hardware, myplasm software and a SWS 50amp plasma. Looking forward to the learning curve!
New from Australia
-
- 6 Star Elite Contributing Member
- Posts: 8645
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: New from Australia
Welcome aboard! I am looking forward seeing some photos of your new setup. You might also consider becoming a contributing member ($20/year) to gain access to the many cut files as well as to help support this fine forum.
David
David
- SegoMan DeSigns
- 4 Star Member
- Posts: 848
- Joined: Sat Jan 06, 2018 4:45 pm
Re: New from Australia
G' Day Mate,
Welcome to the forum, there is a few others on here from down unda. I'm sure a TED or two will get you some advice or at least a good story. My Strine translator is in the shop but I'M sure we can manage
Welcome to the forum, there is a few others on here from down unda. I'm sure a TED or two will get you some advice or at least a good story. My Strine translator is in the shop but I'M sure we can manage