New Member
-
Jrocha82
- 1/2 Star Member
- Posts: 1
- Joined: Wed Jul 03, 2019 6:52 am
New Member
Hello, my name is Joey Rocha and I'm new to this, have no idea how to use this site. Any tips, advice will be greatly appreciated. Thanks.
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1942
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: New Member
Welcome. There is a handy search box at the top of the page.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
robertspark
- 4.5 Star Elite Contributing Member
- Posts: 1816
- Joined: Mon Jun 12, 2017 6:43 pm
Re: New Member
welcome,
start by reading your way through the tech tips section of threads
although done under the linuxcnc banner, this is really a universal guide recently done
http://linuxcnc.org/docs/devel/html/pla ... rimer.html
start by reading your way through the tech tips section of threads
although done under the linuxcnc banner, this is really a universal guide recently done
http://linuxcnc.org/docs/devel/html/pla ... rimer.html
