New member

New to PlasmaSpider? Introduce yourself to the community and tell us a little about you.
Post Reply
sfm1951
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Wed Sep 21, 2022 8:31 pm
Location: Grand Rapids, Minnesota

New member

Post by sfm1951 »

New member looking to get a plasma table we have a bodyshop and build street rods and dirt race cars. We have a well equipped sheetmetal shop and a lathe and a mill. I live in northern minn.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8598
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: New member

Post by adbuch »

Welcome aboard! You will find much information here on both diy and turn-key cutting tables. I personally prefer the Hypertherm cutters, but there are many other brands working well also. Langmuir makes some great affordable tables if you are looking for a readily available unit. Good Luck!
David
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2565
Joined: Thu Jul 24, 2008 11:15 am

Re: New member

Post by plasmanewbie »

Welcome to the site! Sounds like a plasma table would be a game changer for you guys. Lots of info here, ask away if you have any questions.
Post Reply

Return to “Introduce Yourself”