Image
October EasyScriber Giveaway
Industry Pros use FastCut CNC

Intro

New to PlasmaSpider? Introduce yourself to the community and tell us a little about you.
Post Reply
ecruz
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Wed Sep 21, 2022 12:54 pm

Intro

Post by ecruz » Wed Sep 21, 2022 2:08 pm

New to this forum. Been on the CandCNC forum for about a year after a Torchmate conversion from them. Checking things out because I'm going to be doing more things to my table in the upcoming year. Going to expand my table to do 5x10 and just going to build it myself. The Torchmate TM 1 that I have was a build it yourself that they used to sell befor Lincoln bought them out and discontinued the DIY kits. Seems that there is quite a bit of great info here.

plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1988
Joined: Thu Jul 24, 2008 11:15 am

Re: Intro

Post by plasmanewbie » Wed Sep 21, 2022 2:57 pm

Welcome! Plenty of good info and great people here. Post pics of your new if you have the chance :Like

User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 6534
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Intro

Post by acourtjester » Wed Sep 21, 2022 2:59 pm

Welcome aboard, many DIY types here, sounds like your well prepared to do the update. But if you have questions the knowledge is here to help.
Have fun
Tom
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT

TJS
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 453
Joined: Wed Nov 26, 2014 1:22 pm
Location: Fairfield, CT.
Contact:

Re: Intro

Post by TJS » Wed Sep 21, 2022 3:48 pm

Welcome. As Tom Stated there are many table builders here.
T.J.

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 5787
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Intro

Post by adbuch » Thu Sep 22, 2022 4:01 am

Welcome to the forum! I will be looking forward to following your progress as you build your new table.
David

Post Reply

Return to “Introduce Yourself”

Industry Pros use FastCut CNC