Image
To close this announcement click the X in the top right corner.
Industry Pros use FastCut CNC

water tray

All topics related to smoke evacuation, ventilation, and water tables.
Post Reply
RONALD BERG
1 Star Member
1 Star Member
Posts: 11
Joined: Sat Jul 10, 2010 7:07 pm

water tray

Post by RONALD BERG » Wed Mar 09, 2022 9:38 pm

howdy i have a pcam4x4 want to add awater tray how far beneath the grate or should i say how close to the under side of the grate should i be thanks ron also how deep a tray should i use

adbuch
5.5 Star Elite Contributing Member
5.5 Star Elite Contributing Member
Posts: 4372
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: water tray

Post by adbuch » Wed Mar 09, 2022 11:23 pm

Ronald - I'm pretty sure we might have talked about this on one of the other Plasmacam forums. But - here is the link to a slide show for my water tray/draft system build.
David

https://photos.app.goo.gl/h8LHufi6frttfGNQA

RONALD BERG
1 Star Member
1 Star Member
Posts: 11
Joined: Sat Jul 10, 2010 7:07 pm

Re: water tray

Post by RONALD BERG » Sun Mar 13, 2022 12:53 am

that is wow what else can i say you have taken out what percentage 0f dust also out side no filters or any thing its sucking it out correct thank you ron

adbuch
5.5 Star Elite Contributing Member
5.5 Star Elite Contributing Member
Posts: 4372
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: water tray

Post by adbuch » Sun Mar 13, 2022 1:22 am

RONALD BERG wrote:
Sun Mar 13, 2022 12:53 am
that is wow what else can i say you have taken out what percentage 0f dust also out side no filters or any thing its sucking it out correct thank you ron
Yes - the draft system uses an exhaust fan to remove any remaining dust not trapped by the water tray.
David
draft system.jpg
exhaust fan 1.jpg
exhaust fan.jpg

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here


Post Reply

Return to “Water Tables, Ventilation, Air Handling”

Industry Pros use FastCut CNC