Hey Guys,
Hoping this is a little giving back, lots of great info on this forum.
So mostly this should help a few guys who are beginners with rolling.
Anyhow what spurred this was I see a bunch of guys rolling stuff and they might not have had the luxury of working with some absolute metal working gurus.. I've learned a few things but am far from a know it all.
Hope this helps a few of you....
https://imgur.com/a/31CctzP
Thanks
Chris
Stainless 90 fabrication.
-
cstroke
- 3 Star Elite Contributing Member
- Posts: 405
- Joined: Thu May 24, 2012 7:45 pm
Stainless 90 fabrication.
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
-
plasmanewbie
- 5 Star Elite Contributing Member
- Posts: 2604
- Joined: Thu Jul 24, 2008 11:15 am
Re: Stainless 90 fabrication.
Super cool! Thanks for the link
