3 D Printed diamond scribe holder

All topics related to 3d printers and 3d printed plasma table accessories.
Post Reply
User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

3 D Printed diamond scribe holder

Post by acourtjester » Wed Jan 02, 2019 2:50 pm

Here is a video of a 3 D printed holder for a Diamond scribe I made for my table. This plaque is 3" X 5" on Aluminum. :)
https://youtu.be/-C48ROJ-5KQ

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here

DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3 D Printed diamond scribe holder

Post by acourtjester » Wed Jan 02, 2019 4:03 pm

Here is a sample for a serial number plate 2.5" X .960" on cold rolled steel.
DSCN3373.JPG

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here

DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

Kentuckyfarmer
Posts: 256
Joined: Fri Feb 25, 2011 8:26 pm

Re: 3 D Printed diamond scribe holder

Post by Kentuckyfarmer » Sun Jan 06, 2019 1:02 pm

That looks really good, may have to get me one of the scribes
Mikw

plasmanewbie
Elite Contributing Member
Elite Contributing Member
Posts: 938
Joined: Thu Jul 24, 2008 11:15 am

Re: 3 D Printed diamond scribe holder

Post by plasmanewbie » Mon Jan 07, 2019 9:02 am

Very nice! I've got the easysciber diamond scribe and have made some pretty cool things with it. Awesome you 3d printed your own tool holder!!!

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3 D Printed diamond scribe holder

Post by acourtjester » Mon Jan 07, 2019 9:29 am

Thanks Just have all the fun I can, buying a 3D printer has helped me learn how to do 3D drawing. :) I have posted other things I have developed and printed for my Plasma/ router table. I will pass along the files if a member would like to make their own or build one for them. :D
Scribe Bearing holder.JPG
DSCN3361.JPG

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here

DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

User avatar
SeanP
Elite Contributing Member
Elite Contributing Member
Posts: 846
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: 3 D Printed diamond scribe holder

Post by SeanP » Mon Jan 07, 2019 4:14 pm

That's a grand job there Tom!
Guess hot rolled is a no no for those scribes?
That mill scale is tough stuff!
Powermax 45 with Duramax torch.
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw X8, Solidworks
Table build gallery

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3 D Printed diamond scribe holder

Post by acourtjester » Mon Jan 07, 2019 4:22 pm

Thanks I have not tried hot rolled :oops:
Maybe another member that has an easy scribe could reply.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

robertspark
Elite Contributing Member
Elite Contributing Member
Posts: 574
Joined: Mon Jun 12, 2017 6:43 pm
Location: nr Liverpool, UK

Re: 3 D Printed diamond scribe holder

Post by robertspark » Mon Jan 07, 2019 6:14 pm

Thanks for the file, I may give it a go cheers
UCCNC,
Sheetcam
Hypertherm Powermax 45 (nonXP)
Neuron Lite THC
Hobby user (4x4 home table)

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3 D Printed diamond scribe holder

Post by acourtjester » Mon Jan 07, 2019 7:52 pm

PM me with your email address I cannot PM them to you here, these will be the stl files, I have a Tevo Tarantula and the G-codes are configured with a slicer program called ideamaker for that printer. I could also sent the G-code if you want. The short ones are a Drag Knife :lol:
DSCN3375.JPG

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here

DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

robertspark
Elite Contributing Member
Elite Contributing Member
Posts: 574
Joined: Mon Jun 12, 2017 6:43 pm
Location: nr Liverpool, UK

Re: 3 D Printed diamond scribe holder

Post by robertspark » Tue Jan 08, 2019 11:17 am

Those images are much more helpful.

Thought I'd spotted them here: https://www.thingiverse.com/thing:3340487
UCCNC,
Sheetcam
Hypertherm Powermax 45 (nonXP)
Neuron Lite THC
Hobby user (4x4 home table)

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3 D Printed diamond scribe holder

Post by acourtjester » Tue Jan 08, 2019 2:27 pm

yes that is my posting of the item.
Here are the linear bearing I used you may need another auction to get them in the UK.
https://www.ebay.com/itm/6pcs-LM8UU-8mm ... 1438.l2649
and the chrome shafts again shipper to the UK
https://www.ebay.com/itm/8mm-x-1000mm-L ... 2749.l2649
The screw holes in the mounts are set for 10-32 thread don't know the metric size. I press the bearings in first then slide that rods in and press them in the top then the bottom so the distance between the rods is maintained. I use a vice to do this. Cutting the rods to length I use a cutoff wheel as they are very hard.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

robertspark
Elite Contributing Member
Elite Contributing Member
Posts: 574
Joined: Mon Jun 12, 2017 6:43 pm
Location: nr Liverpool, UK

Re: 3 D Printed diamond scribe holder

Post by robertspark » Tue Jan 08, 2019 2:52 pm

Thanks, I've been using these igus ones as they seem to have better support and less play than the bearing ones

https://www.ebay.co.uk/itm/3D-Printer-S ... 1571607189
UCCNC,
Sheetcam
Hypertherm Powermax 45 (nonXP)
Neuron Lite THC
Hobby user (4x4 home table)

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3 D Printed diamond scribe holder

Post by acourtjester » Tue Jan 08, 2019 3:55 pm

You will need 4, 2 on each side
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

motoguy
Elite Contributing Member
Elite Contributing Member
Posts: 1176
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: 3 D Printed diamond scribe holder

Post by motoguy » Tue Jan 08, 2019 8:55 pm

I've had a CR-10 for about a year now. This may need to be it's first project!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3 D Printed diamond scribe holder

Post by acourtjester » Tue Jan 08, 2019 10:32 pm

I have used mine for many projects very handy tool to have :D
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

User avatar
East German
Elite Contributing Member
Elite Contributing Member
Posts: 462
Joined: Sat Jan 05, 2013 8:21 am
Location: Stapelburg Germany

Re: 3 D Printed diamond scribe holder

Post by East German » Wed Jan 09, 2019 1:37 am

Thanks Tom

Load from Thingi

Peter
Sorry for my language! The last English class was in 1982.

Homemade CNC Plasma-Watertable with Mach 3
Triple Beast + Leadschine Drive
Hypertherm Powermax 85
Machine Torch + PriceCNC THC
Hypertherm Powermax 1100
Machine Torch + Proma THC

TPE
Posts: 1
Joined: Mon May 06, 2019 9:19 pm

Re: 3 D Printed diamond scribe holder

Post by TPE » Tue May 07, 2019 12:22 am

acourtjester wrote:
Mon Jan 07, 2019 9:29 am
Thanks Just have all the fun I can, buying a 3D printer has helped me learn how to do 3D drawing. :) I have posted other things I have developed and printed for my Plasma/ router table. I will pass along the files if a member would like to make their own or build one for them. :D
Scribe Bearing holder.JPG
DSCN3361.JPG
Hello,
I am new to the forum and cant see how to PM you yet am interested in the drag knife and scriber assemblies. I just got a 4x8 Wright CNC table and need to get some projects done asap.

thanks!
Josh

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3 D Printed diamond scribe holder

Post by acourtjester » Tue May 07, 2019 9:29 am

This is what you need to do to send a PM to a member :Yay
PM send.JPG

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here

DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

User avatar
Nacs Fab
Elite Contributing Member
Elite Contributing Member
Posts: 321
Joined: Tue Dec 04, 2012 4:11 pm
Location: Columbia, MO

Re: 3 D Printed diamond scribe holder

Post by Nacs Fab » Mon Jan 06, 2020 10:37 pm

Tom, what diamond scribe are you using? I may have to print some up! Thanks for the Share!!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 4034
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3 D Printed diamond scribe holder

Post by acourtjester » Tue Jan 07, 2020 10:48 am

I have use a few different ones it seems the best is the one from "Easy Scribe" they sell a replacement tip. I have also used a diamond tipped used for grinding wheel dressing, they do work and are cheaper but the angle of the tip is not as sharp. I have found others on eBay that could work too. https://www.ebay.com/itm/RDZ-1-8-60-CNC ... 1438.l2649 But these are the same price of the Easy Scribe replacement tip :HaHa
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

Post Reply

Return to “3D Printed Accessories”

Easyscriber engrave attachment for Hypertherm plasma cutters.