Hi guys!
Worked this up for a good friend of mine and owner of Twizted Steel Customs...he always goes with things of a unique nature. Cut at 28" tall, thin detail came out fine.
Great Job Jimbo!
Nightmare Before Christmas. Fresh off the table
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1238
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Nightmare Before Christmas. Fresh off the table
Last edited by ben de lappe on Wed Nov 28, 2018 3:47 pm, edited 1 time in total.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Corpse Bride cut. Fresh off the table
That is sure adventurous of you, did you have your eyes closed with your finger crossed
very nice work thanks for posting.
Lets not have any nightmares before Christmas
very nice work thanks for posting.
Lets not have any nightmares before Christmas
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1238
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Re: Nightmare Before Christmas. Fresh off the table
Yes indeed it was adventurous...the spice of life. Eyes wide open, kerf width ingrained in my brain and all fingers and toes crossed to keep it reasonably sized yet have multiple people cut it. Slight challenge but soooo fun
Thanks buddy!
Thanks buddy!
-
- 4.5 Star Elite Contributing Member
- Posts: 1649
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Nightmare Before Christmas. Fresh off the table
Another amazing job! How thick is the metal and what softwares are you using?
Dave Hanks
Dave Hanks
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1238
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Re: Nightmare Before Christmas. Fresh off the table
Hi Dave!
I know he used 16ga hr. Came out 18.5"x28". On my end all is drawn with Torchmate cad v7.1...old Ol' TWIZTED181 would need to chime in himself on his end, but I'm fairly certain it was cut with his Pcam. Basic stuff.
Thanks Dave, take care.
I know he used 16ga hr. Came out 18.5"x28". On my end all is drawn with Torchmate cad v7.1...old Ol' TWIZTED181 would need to chime in himself on his end, but I'm fairly certain it was cut with his Pcam. Basic stuff.
Thanks Dave, take care.
- dgeorgester
- 2.5 Star Member
- Posts: 127
- Joined: Wed Oct 24, 2012 7:20 pm
- Location: Halifax, Nova Scotia, Canada
Re: Nightmare Before Christmas. Fresh off the table
that's a beautiful cut
- lazybear
- 2.5 Star Member
- Posts: 161
- Joined: Tue Jun 06, 2017 3:49 pm
- Location: Crystal Lake, IL
Re: Nightmare Before Christmas. Fresh off the table
Woo, very cool!!